Remove the carburetor fuel bowl drain bolt and capture the fuel into a clean bowl so it can be reused/recycled.
Take a flathead screwdriver and unscrew the jet.
Make sure that the screw driver sides don't touch the threads so you don't strip anything out.
Once you've removed the jet, the emulsion tube should fall out.
Replace with the performance emulsion tube and screw a new jet in.
Run your engine with both jets supplied to see which is best.
How do I install your jet kit?
Comments
1 comment
What jets are in your 28mm mikuni flat slide and do I need to buy a kit with it.
Please sign in to leave a comment.